Instruction manual Zeester chalets

Barbecuing is permitted on your own terrace if there is a bucket of water within reach. 

Is it too cold in the chalet? First, turn on the heating valves. You will find the control panel in the living room. Use the << and >> buttons to set the desired temperature; you will see the change immediately on the screen. Once you stop, the display will show the room temperature again. At a higher temperature, you will hear the system start up.

The panel has a motion sensor: if it does not detect any movement for 12 hours, the heating will return to 9°C. As soon as there is movement again, the heating will return to the set temperature.

The television is pre-programmed with various channels. The TV is also connected to the internet so you can watch TV online.

The TV aan Zee information channel (channels 1 to 4) shows the latest camping news and information about the surrounding area.

You can use WiFi throughout the campsite. At the chalets, it is best to select the WiFi network ‘Chalets Julianahoeve’. 

Oven - starting a heating function:

1. Set the oven function knob to an oven function.
2. Turn the temperature/microwave power knob to set the temperature.
3. To switch off the appliance, turn the oven function knob to the off position (‘0’).

Microwave - setting the microwave function:

1. Turn the oven function knob to select a microwave function.  The display shows a default microwave power and a default value for the duration function.
2. Press and turn the temperature/microwave power setting knob  to change the microwave power settings. The power can be changed in increments of 100 watts.
3. Press + / - to set the cooking time. The appliance will start automatically after a few seconds.

When the set time has elapsed, an audible signal will sound and the microwave will switch off automatically.

Turn the oven function knob to the OFF position (‘0’).

Follow the step-by-step plan to roll the awning in and out.

Rolling out:

Step 1: roll the awning out completely using the push button on the wall.
Step 2: push the large silver buttons at the end of the fabric upwards using the hook.
Step 3: press the button to pull the fabric taut
Rolling up:

Step 1: roll out the fabric completely using the push button so that the fabric is loose
Step 2: pull the large silver buttons down using the hook
Step 3: press the button to retract the awning

In case of strong wind, we kindly ask you to roll up the awning.

1. Switching on and off
   Press the power button to switch on the sauna. The heaters and color therapy will switch on simultaneously. The default cabin temperature is 40 degrees. After 5 seconds, the actual cabin temperature will be displayed. The cabin timer is set to 30 minutes by default. When you press the on/off button again, the entire cabin will switch off.
2. Infrared heaters
   When you turn on the infrared cabin, the indicator lights will illuminate to show that all heaters are at full power. Use buttons E and F to increase or decrease the power.
3. Color therapy
   Press button N to turn on the light therapy and change colors (red, yellow, green, and white).
4. Time and temperature
   Use the C and D buttons to set the time (+1 minute or -1 minute). Hold down the buttons to set the temperature more quickly. Use the A and B buttons to set the temperature (between 35 and 60 degrees).
5. Radio function
   Press button G to turn on the radio. Use buttons I and J to select the frequency (between 87.5 and 108 MHz). The volume can be adjusted using buttons K and L.
6. MP3 function
   When the cabin is switched on, you can connect an MP3 player. Press button H to switch the sound to the MP3 player. The volume can be adjusted using buttons K and L.